Free and open source for Windows 11

Every speaker you own. One moment.

SyncSound plays your PC audio on wired, USB, HDMI and Bluetooth outputs at the same time, and on phones and TVs on your Wi-Fi. Your microphone measures how late each one is, and SyncSound lines them up so the room sounds like one system.

Windows 11 x64 · MIT licence · Updates itself

SyncSound speaker setup: a room map with a speaker behind the monitor and headphones behind the listener, with 7.1 and 8D modes

255ms

Bluetooth is late. Windows doesn't fix it.

On our test desk a pair of Bluetooth headphones reached the ear 255 ms after the wired speaker. That's a clear echo on every word. Windows can only play one device at a time anyway, so a second speaker means a second app, and nothing keeps them together.

Hear the gap, then close it

A simulation of what reaches your seat. Each bar is a beat. Press Calibrate to see what SyncSound does: it delays the faster speaker until both arrive together.

Offset at your seat 255 ms

Built for the speakers you already have

No extra hardware, no account, no cloud. Everything runs on your PC.

Your phone is a speaker now

Turn on Network speakers, scan the QR code with your phone and your PC audio plays there too. Phones, tablets, other PCs and smart TV browsers all work, with nothing to install. They join as outputs, so volume, delay and Calibrate work the same as for any speaker.

The SyncSound page on a phone with a large Tap to play button

Up to sixteen outputs at once

Each output gets its own buffer, drift correction, volume, mute and delay. Gaming, Balanced and Synchronized modes trade latency for stability.

Routing tab listing outputs with volume, delay and latency for each

One-click calibration

A click track plays through each speaker in turn. Your mic hears when each one arrives and SyncSound sets the delays.

Room map, 7.1 and 8D

Drag speakers to where they really are. Stereo is panned to match, 7.1 is upmixed, and 8D moves the sound around you.

Room map with draggable speaker positions

Route only some apps

Send just Spotify or a game to the extra speakers while calls stay on your headset.

Apps tab with a checklist of apps currently playing audio

EQ and room correction per speaker

Bass, mid, treble, low cut and a 10-band EQ for each output. Measure room plays a sweep and aims each speaker at a warm or flat target, mostly by cutting booms.

Equalizer tab with sliders and a frequency response curve

Lives in the tray

Starts with Windows if you want, restores your last setup, and installs signed updates from GitHub by itself.

Make cheap speakers sound like more

Small speakers can't play deep bass, bright ones get tiring, and everything sounds thin at low volume. The Sound tab fixes the problems you actually hear.

  • Listening modesMusic, Movie, Game or Voice in one click. Pick an app and its mode turns on by itself while it plays.
  • Bass where it can be playedMark a speaker as small and its deep bass goes to a subwoofer or bigger speaker. Virtual bass adds harmonics so you still hear the low notes.
  • Tone that suits your speakersWarm or bright tilt, loudness for quiet listening, stereo width for speakers close together, and de-harsh for sharp treble only when it gets loud.
  • Even volume and night modeQuiet videos come up, loud ads come down, and late-night films keep the dialogue without the explosions.
  • See what each speaker playsA live spectrum per speaker, measured after every effect, so you can watch a change work.
Sound tab with listening modes and, for two speakers, a live spectrum with peak hold, loudness in LUFS and the sample peak

Pro tools when you want them

Hidden under Advanced, so everyday use stays simple.

  • FIR convolutionLoad an impulse response from REW, rePhase or Dirac for each speaker. Zero added latency.
  • 5.1 and 7.1 routingCapture true surround and send front, centre, LFE, side or rear channels to any speaker.
  • 44.1, 48 or 96 kHzChoose the engine's sample rate to match your sources and devices.
  • Exclusive modeOpen a device in WASAPI exclusive mode for the lowest latency it supports.
  • A/B compare and undoSave two setups and flip between them instantly. Ctrl+Z undoes any change.
  • Your own hotkeysSet any shortcut for routing, A/B, modes and undo, plus mute, louder and quieter for each speaker. Works from the tray.
  • Safety limiterEvery speaker is held at or below −1 dBFS after EQ, virtual bass and FIR, with zero added latency, so boosts never clip.
  • Loudness and peak metersLUFS (momentary, 3 s and overall) and sample peak for each speaker, plus peak hold on the live spectrum.
  • Settings filesExport your whole setup to a file and load it on another PC.

Set up in three steps

  1. 01

    Install

    Download the installer and run it. SmartScreen may ask you to confirm while the code-signing certificate is pending.

  2. 02

    Turn on speakers

    Switch on the outputs you want on the Routing tab and press Start routing. Optional: add the free VB-CABLE so your default speaker can be delayed too.

  3. 03

    Calibrate

    Sit where you listen, pick your mic and press Calibrate delays. About ten seconds later every speaker lands together.

Questions

Something else? Open an issue.

Why does Windows warn me when I run the installer?

The installer isn't Authenticode-signed yet, so SmartScreen doesn't know it. Choose More info, then Run anyway. Signing through SignPath Foundation is being set up; see the code signing policy. Updates are already signed with SyncSound's own key, and the app refuses any update that doesn't match it.

Do I need VB-CABLE?

No. Without it, Windows plays your default device directly and SyncSound adds the others, delayed to match. With the free VB-CABLE as the default, SyncSound can delay every speaker, including the one Windows used to play. SyncSound restores your previous default when you turn it off or quit.

Does it work with any Bluetooth headphones?

Any headphones or speakers Windows shows as a playback device. Bluetooth delay varies by model and codec, which is why SyncSound measures it with your microphone instead of guessing.

Will it make my cheap speakers sound better?

Usually, yes, within what the speaker can do. Bass routing stops small speakers distorting, virtual bass and loudness make them sound fuller, and de-harsh tames shrill treble. No software can make a small speaker play a real 40 Hz note; for that, add a subwoofer and set it as the bass speaker.

Is it free?

Yes. SyncSound is open source under the MIT licence. There's no account, no subscription and no ads.

Why does my iPhone need the screen on?

iPhone Safari pauses web audio when the screen locks, and a page served over plain HTTP can't reliably prevent that. Keep the SyncSound page open with the screen on.

Why does Windows ask about the firewall?

Turning on Network speakers makes SyncSound listen on your local network so phones can connect, and Windows asks before any app does that. Choose Allow. If phones still can't connect, set your Wi-Fi to Private in Windows settings. SyncSound only accepts devices on your local network, and it asks you before a device that typed the address can join. A phone that scanned the QR code on your PC screen joins straight away.

My phone can't connect

Check that the phone is on the same Wi-Fi as the PC, not a guest network, and that the router doesn't use client isolation. Then check the firewall. If Windows showed a prompt, it must be allowed on Private networks, and the network may need to be set to Private rather than Public. Third-party antivirus firewalls such as Kaspersky, Norton or ESET can block it too. Mark your home network as trusted there, or allow syncsound-desktop.exe.

What does it send over the internet?

Only the update check, which downloads a small file from GitHub Releases. You can turn it off in the app. Audio, settings and microphone recordings never go to the internet. With Network speakers on (off by default), audio goes only to devices you allow on your own Wi-Fi.

Make the room sound like one system.

Download for Windows